Mr. Denjiro is a science teacher. Today he has just received a specially ordered water tank that will certainly be useful for his innovative experiments on water flow.

Figure 1: The water tank |

The size of the tank is 100cm (Width) * 50cm (Height) * 30cm (Depth) (see Figure 1). For the experiments, he fits several partition boards inside of the tank parallel to the sideboards. The width of each board is equal to the depth of the tank, i.e. 30cm. The height of each board is less than that of the tank, i.e. 50 cm, and differs one another. The boards are so thin that he can neglect the thickness in the experiments.

Figure 2: The front view of the tank |

The front view of the tank is shown in Figure 2.

There are several faucets above the tank and he turns them on at the beginning of his experiment. The tank is initially empty. Your mission is to write a computer program to simulate water flow in the tank.

The input consists of multiple data sets.
*D* is the number of the data sets.

...

The format of each data set
(*DataSet*_{d} , 1 <= *d* <= *D*)
is as follows.

...

...

...

Each line in the data set contains one or two integers.

*N* is the number of the boards he sets in the tank .
*B _{i}* and

*H _{i}* s differ from one another. You may assume the
following.

0 <N< 10 ,

0 <B_{1}<B_{2}< ... <B< 100 ,_{N}

0 <H_{1}< 50 , 0 <H_{2}< 50 , ..., 0 <H< 50._{N}

*M* is the number of the faucets above the tank .
*F _{j}* and

There is no faucet just above any boards .
Namely, none of *F _{j}* is equal to

You may assume the following .

0 <M<10 ,

0 <F<_{1}F< ... <_{2}F< 100 ,_{M}

0 <A_{1}< 100, 0 <A_{2}< 100, ... 0 <A< 100._{M}

*L* is the number of observation time and location.
*P _{k}* is the

None of *P _{k}*
is equal to

You may assume the following .

0 <L< 10 ,

0 <P_{1}< 100, 0 <P_{2}< 100, ..., 0 <P< 100 ,_{L}

0 <T_{1}< 1000000, 0 <T_{2}< 1000000, ... , 0 <T< 1000000._{L}

For each data set,
your program should output *L* lines each containing
one real number which represents the height (cm) of the water level specified
by the *x*-position *P*_{k}
at the time *T*_{k}.

Each answer may not have an error greater than 0.001. As long as this condition is satisfied, you may output any number of digits after the decimal point.

After the water tank is filled to the brim,
the water level at any *P _{k}* is equal to the
height of the tank, that is, 50 cm.

2 5 15 40 35 20 50 45 70 30 80 10 3 20 3 60 2 65 2 6 40 4100 25 7500 10 18000 90 7000 25 15000 25 22000 5 15 40 35 20 50 45 70 30 80 10 2 60 4 75 1 3 60 6000 75 6000 85 6000

0.666667 21.4286 36.6667 11.1111 40.0 50.0 30.0 13.3333 13.3333